Blog Archives

Bigpipe vs TMSH

Important things to remember when examining commands in tmsh:

  • show (usually) provides just the statistical information, with configuration parameters present to provide a level of disambiguation.
  • list provides configuration information, but just variations from the default. For example, “list /ltm nat” will only show the “originating-address” information
  • all-properties extends a “list” command to show every configuration option, not just the variations from default.


bigpipe command tmsh Command Comment
b arp show show /net arp all
b arp all delete tmsh delete /net arp all
b class DATA-GROUP mode read modify ltm data-group DATA-GROUP access-mode read-only
b class show show running-config /ltm data-group
b cluster show show /sys cluster all-properties
b config load file.ucs load /sys ucs file.ucs
b config save file.ucs save /sys ucs file.ucs
b config sync run /cm config-sync from-group/to-group DEVICEGROUPNAME
b conn show show /sys connection
b conn show all show /sys connection all-properties Show all connection table properties
b conn ss server node-ip:node-port delete delete /sys connection ss-server-addr node-ip ss-server-port node-port Delete connection table entries for node-ip node-port
b daemon list list /sys daemon-ha all-properties
b db < key name > < value > modify /sys db < key name > value < value > Modify database values
b db Platform.PowerSupplyMonitor disable tmsh modify sys db platform.powersupplymonitor value disable Disables PSU alert if only one PSU in use on Dual PSU system
b db show show running-config /sys db -hidden all-properties
b export my.config.scf save /sys scf my.config.scf v10.x only
b export my.config.scf save /sys config file my.config.scf tar-file my.config.tar v11.0+
b failover standby run /sys failover standby v11+
b fo show show /sys failover
b fo standby run /util bigpipe fo standby v10+
b ha table show /sys ha-status all-properties
b hardware baud rate modify /sys console baud-rate v10: sol10621 | v11: sol13325
b ha table show show /sys ha-status all-properties
b httpd list list /sys httpd To list httpd configuration.
b import my.config.scf load /sys scf my.config.scf v10.x only
b import my.config.scf load /sys config file my.config.scf tar-file my.config.tar v11.0+
b interface show -j show /net interface -hidden all-properties -hidden is not tab completable, but should be shown in the command output on iHealth.
b load load sys config partitions all
b merge load /sys config merge Added in v11. In v10 use bigpipe
b merge /path/to/file.txt tmsh load /sys config file /path/to/file.txt merge Merge a file into the BIG-IP configuration. Added in v11. In v10, use bigpipe
b mgmt show show running-config /sys management-ip
b monitor show show running-config /ltm monitor (?)
b nat show show /ltm nat all or list /ltm nat all-properties The two tmsh commands are required here since b nat show will list the unit preference and ARP status. Statistical information is shown via “show” while configuration information is shown via “list”.
b node all monitor show list ltm node monitor
b node show show /ltm node
b ntp servers modify sys ntp servers add { }
b packet filter all show show /net packet-fliter
b partition list auth partition no “show” command yet, list will only show written partitions
b persist tmsh show ltm persistence persist-records
b platform show /sys hardware
b pool list list /ltm pool
b pool show show /ltm pool members
b profile access all stats
b profile auth all show all show /ltm auth profile all The tmsh auth command does not display associated OCSP information shown by bigpipe.
b profile http ramcache show show /ltm profile http
b profile http stats show /ltm profile http
b profile ssl stats show /ltm profile ssl
b profile persist profile_name list all tmsh list ltm persistence profile_name all-properties
b profile tcp show show /ltm profile tcp
b profile tcp stats show /ltm profile tcp
b profile udp show show /ltm profile udp
b profile udp stats show /ltm profile udp
b profile xml show show /ltm profile xml
b reset load / sys default-config v10.x
b reset load / sys config default v11.x
b route show show /net route all
b rule < rule > show all show /ltm rule < rule >
b rule show show /ltm rule all
b rule stats reset reset-stats /ltm rule < rule >
b save save sys config partitions all
b self show show running-config /net self
b snat show /ltm snat
b snatpool show show /ltm snatpool
b software show sys software
b software desired install sys software image NAME volume HDX.Y reboot
b software desired install sys software image NAME create-volume volume HDX.Y v11.0+ : Creates volume and installs software. (Cannot create empty volumes in v11)
b software desired install sys software hotfix NAME volume HDX.Y Installs desired Hotfix to the specified Volume.
b stp show show running-config /net stp all-properties
b syslog list all list sys syslog all-properties
b syslog remote server none modify sys syslog remote-servers none
b syslog remote server test-srv host modify sys syslog remote-servers add {test-srv{host}} You can append “remote-port 517” for example to the end of the command to specify the port
b syslog remote server test-srv local ip modify sys syslog remote-servers modify {test-srv{local-ip}} The self ip must be non-floating
b system hostname modify sys global-settings hostname NEWHOST.EXAMPLE.COM
b trunk show -j show /net trunk -hidden all
b trunk all lacp show show /net trunk detail
b unit show
b verify load load sys config verify
b version show /sys version Takes grep (but not “head” as in “b version |head”) – for example, grep on build: tmsh show sys version |grep -i build
b virtual address show show /ltm virtual-address all-properties “show” does not show the objects used by the virtual, and list does not show statistics.
b virtual all show all show /ltm virtual all-properties or list /ltm virtual all-properties “show” does not show the objects used by the virtual, and list does not show statistics.
b vlan all show all -j show /net vlan -hidden
b vlangroup all show all show /net vlan-group all
bigstart status|start|stop|restart SERVICE_NAME show|start|stop|restart sys service SERVICE_NAME
bpsh (?) load sys config from-terminal merge Merge config from interactive shell. Paste/type the config objects you want to add. Then type Ctrl+d to complete the submission or Ctrl+c to cancel the input. Added in v11.0.

Linux Commands (Commands only accessible from the CLI)

Linux Command tmsh Comment
arp -an run /util bash -c “arp -an”
crontab -l run /util bash -c “crontab -l”
date run /util bash -c “date”
df -h run /util bash -c “df -h”
df -i run /util bash -c “df -i”
df -ik run /util bash -c “df -ik”
eud_info (version) run /util bash -c “eud_info (version)”
free run /util bash -c “free”
grub default -d run /util bash -c “grub default -d”
grub default -l run /util bash -c “grub default -l”
halid run /util bash -c “halid”
hsb snapshot (version) run /util bash -c “hsb snapshot (version)”
ifconfig -a run /util bash -c “ifconfig -a”
interrupts run /util bash -c “interrupts”
ip -f dnet addr show run /util bash -c “ip -f dnet addr show”
ip -f inet addr show run /util bash -c “ip -f inet addr show”
ip -f inet link show run /util bash -c “ip -f inet link show”
ip -f inet neigh show run /util bash -c “ip -f inet neigh show”
ip -f inet route show run /util bash -c “ip -f inet route show”
ip -f inet rule show run /util bash -c “ip -f inet rule show”
ip -f inet tunnel show run /util bash -c “ip -f inet tunnel show”
ip -f inet6 addr show run /util bash -c “ip -f inet6 addr show”
ip -f inet6 link show run /util bash -c “ip -f inet6 link show”
ip -f inet6 neigh show run /util bash -c “ip -f inet6 neigh show”
ip -f inet6 route show run /util bash -c “ip -f inet6 route show”
ip -f inet6 tunnel show run /util bash -c “ip -f inet6 tunnel show”
ip -f ipx addr show run /util bash -c “ip -f ipx addr show”
ip -f link addr show run /util bash -c “ip -f link addr show”
ip -f link link show run /util bash -c “ip -f link link show”
ip -f link neigh show run /util bash -c “ip -f link neigh show”
ip -f link route show run /util bash -c “ip -f link route show”
ls -las /var/local/ucs run /util bash -c “ls -las /var/local/ucs”
ls -lasLR /dev/mprov/ run /util bash -c “ls -lasLR /dev/mprov/”
ls -lasLR /var/core run /util bash -c “ls -lasLR /var/core”
ls -lasR /boot run /util bash -c “ls -lasR /boot”
ls -lasR /hotfix run /util bash -c “ls -lasR /hotfix”
lsof -n run /util bash -c “lsof -n”
meminfo run /util bash -c “meminfo”
mount run /util bash -c “mount”
netstat -nge run /util bash -c “netstat -nge”
netstat -ni run /util bash -c “netstat -ni”
netstat -pan run /util bash -c “netstat -pan”
netstat -sa run /util bash -c “netstat -sa”
ntpdc -n -c peer run /util bash -c “ntpdc -n -c peer”
ntpq -pn run /util bash -c “ntpq -pn”
pci run /util bash -c “pci”
pstree run /util bash -c “pstree”
qkview run /util qkview
rpm -qa run /util bash -c “rpm -qa”
switchboot -l run /util bash -c “switchboot -l” Or use: /sys reboot volume < volume >
sysctl run /util bash -c “sysctl”
top run /util bash -c “top”
vmstat run /util bash -c “vmstat”
who -aH run /util bash -c “who -aH”

Bigip LTM commands

I have been playing arround with Bigip and I think that there are some interesting commands:

#Checking persistance

Read the rest of this entry